Grain Systems Tanks PNEG-4030 - Manual (Page 56)

6. Stiffeners
56 PNEG-4030 40 Series 27' and 30' Diameter Bins
Close-Punch 2 Ring Stiffener (2-14 Gauge) to a Laminated Stiffener
(2 Gauge) with an Insert (10-14 Gauge)
Refer to the following information for a close-punch connections with a 2 ring stiffener (CTS-2073XX) to a
laminated stiffener (CTS-2114XX) and insert (CTS-2113XX).
(See Figure 6S.)
Figure 6S Close-Punch 2 Ring Stiffener to a Laminated Stiffener with an Insert
NOTE: 2 Post stiffeners shown. The bolt pattern will vary for 3 post. Only place bolts where holes in the
stiffeners align with holes in the sidewall sheet.
Ref # Part # Description
A CTS-2073XX Close-Punch 2 Ring Stiffener
B CTS-2114XX Close-Punch Laminated Stiffener
C CTS-2113XX Insert
D S-7485 Flange Bolt 3/8"-16 x 1" JS Grade 8 or Grade 8.2
E S-9426 Flange Nut 3/8"-16 JS
F Completed Assembly