Grain Systems Tanks PNEG-4030 - Manual (Page 82)

11. Roof Assembly
82 PNEG-4030 40 Series 27' and 30' Diameter Bins
Roof Assembly for 27' through 30' Bins
NOTE: Be sure to install ladder rungs and safety steps as you assemble roof panels. When assembling
such pieces as roof ladder rungs, use 5/16" x 1" bolts with a flat washer on top of the slot and extra
neoprene washer between the roof and the piece being added. This will ensure a more protective
seal against moisture.
Figure 11D
NOTE: Refer to seal clip details on Page 85.
Typical all eave clips
5/16" x 1" Flange nuts (S-3611)
and bolts (S-10250)
NOTE: The parts pointed out on this page
are listed on
Page 83.