Grain Systems Bin Accessories PNEG-1096 - Manual (Page 43)

43 PNEG-1096 Ladder, Safety Cage, & Platforms
4.00 INSIDE STIFFENED
SAFETY CAGE BELL SECTIONS
LS-4352 Safety Cage Bell Hoop Half (Red)
LS-4353 Safety Cage
44" Vertical Support
SAFETY CAGE BELL SECTIONS
The safety cage bell section is to be used at the point of termination of the safety cage just
above the rest platforms or the concrete. Attach the vertical supports to the existing hoop
halves. Now, fasten the bell safety cage brackets (red) to the ladder (some field drilling may be
necessary at this point.) Attach the special bell safety cage hoop halves to the bell brackets
and attach the vertical supports to the bell hoop halves. The vertical supports will have to be
bent at the flat area to allow for the angle of the bell section.
REV. 10-16-95