Grain Systems Bin Accessories PNEG-1096 - Manual (Page 75)

75 PNEG-1096 Ladder, Safety Cage, & Platforms
2.66 (OPTIONAL)
When starting the platform support, you must attach the mounting angle to the
sidewall of the grain bin. Refer back to the first page for the correct holes to be
used by the platform. Attach the angle using 5/16" x 3/4" bolts and nuts, tighten
at this time. Next, bolt the support angle to the mounting angle again using the
proper holes. Attach the brace angle to the mounting angle as shown in the
diagram at left. Use 5/16" x 3/4" bolts and nuts for all connections.
PLATFORM PACKAGE LS - 6683
ENTRANCE ANGLE (1)
LS-6621
58 in. HANDRAIL (2)
LS-6702
38 in. HANDRAIL (2)
LS-6677
FLOOR BRACE (4)
LS-6701
TOE PLATE (2)
LS-6682
RIGHT HAND DIAGONAL
SUPPORT ANGLE LS-6700
SUPPORT ANGLE (2)
LS-6679
SIDEWALL SUPPORT (2)
TDP-5008N