Grain Systems Bin Accessories PNEG-914 - Manual (Page 16)

5. Installation
16 PNEG-914 Flex-Flo
Slide Gate Installation
Insert the slide into the transfer plate. The slide must be in its operating position prior to attaching the slide
shield to the transfer plate. Use two (2) 5/16"-18 x 1" truss head tap bolts to mount the slide shield.
(See Figure 5D.)
Bolt unloader to transfer plate/unloader brace assembly as shown in Figure 5E . Note orientation of these
bolts. (See Figure 5E.)
Figure 5D
Figure 5E
Ref # Part # Description
1 BLK-10488 16" 67°, 16" Hopper Collar, (24 Holes)
1 BLK-10489 16" 60° Hopper Collar, (24 Holes)
1 BLK-11463 16" 60° Hopper Collar (27 Holes)
1 BLK-12342 16" 60° Hopper Collar (18 Holes)
2 FLX-2194 16" 30° Black Plastic Boot
2 FLX-2194C 16" 30° Clear Plastic Boot
2 FLX-2195 16" Straight Black Plastic Boot
2 FLX-2195C 16" Straight Clear Plastic Boot
2 FLX-4869 16" Double Straight Black Boot
3 BLK-10496 Transfer Plate
4 FLX-4819 Unloader Brace
5 FLX-4782 Slide Gate
6 BLK-10497 Slide Gate Shield
7 S-4336 5/16" x 1" Truss Head Machine Screw
8 S-4337 5/16"-18 Nylon Insert Nut
9 S-4338 5/16" Nylon Washer
10 S-8328 Screw, MS 5/16"-18 x 1" RHS ZN Grade 2
11 S-396 Hex Nut 5/16"-18 YDP Grade 2