Grain Systems Tanks PNEG-4105 - Manual (Page 107)

Chapter 7: Roof Assembly
Figure 7-23 Center collar assembly
A Center collar (CTR-0089 and CTR-0091) E 1/2 x 1-3/4 in. flange bolt (S-10252)
B 1/2 in. flange nut (S-10253) F Center collar splice plate (CTR-0023)
C 1/2 x 1-3/4 in. flange bolt (S-10252) G 1/2 in. flange nut (S-10253)
D Center collar splice plate (CTR-0097) I Outer holes
7. Locate the column of three holes (K) that are not paired together on the inside radius of the center
collar, and install a center collar channel clip (M).
8. Secure with flange bolts (L) and flange nuts (J).
9. Repeat this procedure for the remaining three center collar channel clips (M).
Pneg-4105 105 Ft Diameter 40-Series Bin 107