Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1375 - Manual (Page 11)

PNEG-1375 Farm/Commercial Distributor Cable Control 11
5. INSTALLATION
Installation of Cable Wheel & Coupler Connector
Once the distributor has been installed the installation of the cable controls can begin. First install
the cable wheel. This cable wheel mounts to the control pipe coming from the bottom of the
distributor using (3) 3/8"-16 x 1-1/2" Bolts (S-7521) and (3) 3/8-16 whiz nuts (S-968).
Figure 5A