Cable guides, Installation – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1375 User Manual
Page 17
Advertising
![background image](/manuals/277728/17/background.png)
PNEG-1375 Farm/Commercial Distributor Cable Control
17
5. INSTALLATION
Cable Guides
To help keep the cable in-line from the upper assembly to lower assembly intermediate cable
guides need to be installed. The quantity of the intermediate cable guides is determined by the
height of the leg. The company recommends that they be installed every 20 feet. These
intermediate cable guides (GSB-0022) are fastened at the trunking joints using the same
hardware as the joint. The Assembly shows how the intermediate cable guides are located on
the trunk joints
. For cable installation
.
Note: Cable is not supplied with cable control. The company recommends 3/16" aircraft
cable.
Figure 5I
Advertising