Connector pulley assembly, Installation – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1375 User Manual
Page 12
Advertising
12
PNEG-1375 Farm/Commercial Distributor Cable Control
5. INSTALLATION
Connector Pulley Assembly
The next piece to install is the connector-pulley assembly (GSB-0045). This piece mounts to the
Top Cable Wheel Weldment as shown in
. These are fastened together using (2)
5/16" x 1" bolts and whiz nuts, supplied in the hardware package (FC-DCG-HDW).
Figure 5B
Advertising