Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1375 - Manual (Page 13)

PNEG-1375 Farm/Commercial Distributor Cable Control 13
5. INSTALLATION
Cable Guide Location
Next locate the upper cable guide assembly (DFB0388). The location on the trunking is
determined by the height of the cable wheel. The cable must run in-line from the cable wheel to
the sheaves in the cable guide assembly. This location is shown in
Figure 5C . For cable
installation see page 18 .
Note: Cable is not supplied with cable control. The company recommends 3/16" aircraft
cable.
Figure 5C