Grain Systems PNEG-1707 - Manual (Page 27)

6. Vision Touch Screen Display
PNEG-1707 TM-Series Tower Dryer 27
Figure 6D
The plenum temperature set point range is 80°F-250°F, and the current temperature set point for each
plenum is displayed next to the corresponding Plenum button.
The grain temperature set point range is 80°F-150°F, and the current temperature set point for the grain
temperature is displayed next to the Grain Temperature button. The grain temperature set point is used
for the temperature based moisture control only.
Modifying a temperature set point is much like setting a timer described on Page 25 . Touch the
desired button of the set point you wish to change. The Modify Temperature Set Point screen will
appear. Enter the desired temperature using the displayed number pad then touch the Accept button.
Touching the Exit button at the bottom of the Select Temperature Set Point to Modify screen will return
you to the Operators screen.