Grain Systems PNEG-1707 - Manual (Page 29)

6. Vision Touch Screen Display
PNEG-1707 TM-Series Tower Dryer 29
4. Plenum temperature manager: The plenum temperature manager is used by the automatic
moisture control to automatically lower drying temperatures if the maximum dryer unload rate is
exceeded. Touching the Plenum Temperature Manager will display a Configuration screen that will
allow you to turn this feature ON or OFF. Also, a configuration section is presented so that the user
can edit the behavior of this option.
Figure 6G
5. Burner mode: Touching the Burner Mode button will display the Select Burner Mode screen.
(See Figure 6H.) Tower dryer burner mode should always be set to ALL HIGH/LOW.
Figure 6H