Grain Systems PNEG-583 - Manual (Page 10)

10
SEREIS ONE HEATER
HEATER ELECTRICAL INSTALLATION (460V FANS)
1. Connect power cord to fan control box.
2. Make field connections of wires in fan box as
shown in Figure 2. 110V power supply or .5KVA 460V
to 110V transformer must be used to supply power for
heater.IMPORTANT! HEATER MUST BE INTER-
LOCKED WITH FAN FOR SAFE OPERATION.
Figure 2: 460 volt fan control box.
3. Connect deluxe thermostat control (optional) as
shown in Figure 2. IMPORTANT! THERMOSTAT
MUST BE INSTALLED FOR SAFE OPERATION.
HEATER INSTALLATION