Grain Systems PNEG-583 - Manual (Page 18)

18
SEREIS ONE HEATER
Adjusting the vaporizer coil on a liquid propane model.
The top photo shows the setting up (cool),
and the bottom photo shows the coil down (hot).
ADJUSTING THE VAPORIZOR
1. Vaporizer should be adjusted so the vapor pipe train
runs warm to the touch (100°-120°F).
2. Loosen 5/16" bolts on adjustment bracket.
3. Raise vaporizer if running too hot, lower if too cold.
4. Move vaporizer only 1" at a time and allow a few
minutes for tem-perature to equalize.
5. Tighten 5/16" bolts and watch heater run for several
minutes to verify adjustment.
OPERATING PROCEDURE