Grain Systems PNEG-583 - Manual (Page 9)

9
SEREIS ONE HEATER
HEATER ELECTRICAL INSTALLATION (230V FANS)
1. Connect power cord to fan control box.
2. Make field connections of wires in fan box as shown
in Figure 1. IMPORTANT! HEATER MUST BE IN-
TERLOCKED WITH FAN FOR SAFE OPERATION.
Figure 1: 230 volt fan control box.
3. Connect deluxe thermostatcontrol (optional) in
heater box as shown in Figure 1. IMPORTANT! THER-
MOSTAT MUST BE INSTALLED FOR SAFE OP-
ERATION.
HEATER INSTALLATION