Grain Systems Bin Accessories PNEG-1112 - Manual (Page 24)

2. Installation
24 PNEG-1112 Sidewall Bin Stair Assembly
4. Loosely bolt the handrail baluster to the outside stair siderail using one (1) 5/16" x 3/4" bin bolt and
serrated flange nut. The bin bolt and serrated flange nut should be preliminarily installed to the
inside end of the rear slot for bins greater than 30' in diameter, and to the hole outside of the slots
for bins less than or equal to 30' in diameter.
Figure 2V
Figure 2W
5. The loosely assembled stair section is now ready to be installed on the bin. After the stairs are
put into place and adjusted appropriately, the bin bolts and serrated flange nuts can be tightened.