Attaching the inside siderail – Grain Systems Bin Accessories PNEG-1112 User Manual
Page 32
Advertising
2. Installation
32
PNEG-1112 Sidewall Bin Stair Assembly
Attaching the Inside Siderail
Bring the next assembled stair section to the previously installed stair section.
1. Place the outside surface of the inside stair siderail to the inside of the already installed inside
stair siderail.
and
, loosely bolt the two (2) inside stair siderails together with
two (2) 5/16'' x 3/4'' bin bolts and serrated flange nuts, and the inside stair siderail to the wall bracket
with one (1) 5/16'' x 3/4'' bin bolt and serrated flange nut. Note the four (4) total attachment points
on the figures.
Figure 2AI
Figure 2AJ
Advertising