TC Electronic G-Major 2 - Manual (Page 39)

Pitch Shifter
With the Pitch Shifter of G-Major 2, you can
add two voices, each with a fixed pitch within ±
one octave from the input note. G-Major 2
detects and processes signals so quickly that
you will never notice any “searching” for the
notes (as with many older octaver units or
octaver stomp boxes). Try lowering the single
Voice to -1200 Cents (100 Cents = 1 semitone).
With a Mix level of 100 %, you will be able to
get at pretty good bass-simulation.
Voice 1
Range: -2400 to 2400
Specifies the Pitch of the first voice. As 100
Cents equal 1 semitone, you can select any
interval between two octaves below the input
signal’s pitch to two octaves above it.
Voice 2
Range: -2400 to 2400
Specifies the Pitch of the second voice. As 100
Cents equal 1 semitone, you can select any
interval between one octave below the input
signal’s pitch to one octave above it.
Pan 1
Range: 50L to 50R
Pan parameter for the first voice.
Pan 2
Range: 50L to 50R
Pan parameter for the second voice.
Dly 1
Range: 0 to 350 ms
Defines the delay time for the first voice.
Dly 2
Range: 0 to 350 ms
Defines the delay time for the second voice.
FB 1
Range: 0 to 100 %
This parameter determines how many
repetitions there will be on the delay of the first
voice.
FB 2
Range: 0 to 100 %
This parameter determines how many
repetitions there will be on the delay of the
second voice.
Level 1
Range: -100 to 0 dB
Defines the level for voice 1.
Level 2
Range: -100 to 0 dB
Defines the level for voice 2.
Mix
Range: 0 to 100 %
This parameter sets the relationship between
the level of the dry signal and the level of the
effect in this block.
OutLev – Out-level
Range: -100 to 0 dB
This parameter sets the overall output level for
this effect.
PITCH
38