TC Electronic G-Major 2 - Manual (Page 42)

41
Tri-Chorus Norm/Asym
The Tri-Chorus is a variation of the regular
Chorus that uses three stereo chorus modules
with various offsets for the Depth, Speed,
Phase and Chorus Delay time parameters. The
result is a unique, very broad and lush sound.
Speed, Depth and Time parameters are
identical to those in the standard Chorus.
Normal & Asymmetrical
Normal:
The “Normal” variation produces a more
traditional Chorus sound, where the phases of
the three Choruses are tilted by 90, 180 and
270 degrees respectively.
Asymmetric:
With the “Asymmetrical” variation, the phase
and depth parameters are tuned to produce a
wilder and “less controlled” Chorus effect.
Speed
Range: 0.050 Hz to 20 Hz
This parameter sets the speed of the effect.
Depth
Range: 0 to 100 %
The Depth parameter specifies the intensity of
the effect. The value represents the amplitude
of the modulating waveform.
Tempo
Range: Ignore, 2 to 1/32T (T= Triplet & D=
Dotted)
When set to any value between 2 and 1/32T,
the Global Tempo is subdivided according to
this setting. When set to “Ignore”, the speed set
using the Speed parameter is used instead.
The Tap Master parameter – located in
the Global menu – specifies whether
the Global tempo or the tempo set by
the Speed parameter in each preset
should be used at preset change.
Width
Range: 0 % to 100 %
The higher the range, the more spacious the
effect appears. In a stereo setup you will really
hear the difference. From very narrow at 0 % to
very wide at 100 %.
Phase Reverse
Settings: Off/On
Setting this parameter to “On” reverses the
phase of the processed signal in the right
channel. This gives a very wide-sounding
Chorus effect and a less defined sound.
Mix
Range: 0 to 100 %
This parameter sets the relationship between
the level of the dry signal and the level of the
effect in this block.
OutLev – Out Level
Range: -100 to 0 dB
This parameter sets the overall output level for
this effect.
MODULATION
E
N
G
L
IS
H