TC Electronic G-Major 2 - Manual (Page 51)

50
HiFact & LoFact – (High Factor/Low Factor)
Range: -25 to 25
Use these parameters to emphasize or
attenuate the selected Hi and Lo Color types.
RoomLv – Room Level
Range: -100 to 0 dB
This parameter sets the level of the reverb’s
initial reflections (early reflections). These
reflections define the actual sound of the effect.
RevLev – Reverb Level
Range: -100 to 0 dB
This parameter sets the level of the reverb’s
diffuse field.
Diff – Diffuse
Range: -25 to 25
With this parameter, you can fine-tune the
density of the reverb’s diffuse field. It is set
automatically when you select a Decay time
and allows you to reduce flutter in the diffuse
field to an absolute minimum.
Mix
Range: 0 to 100 %
This parameter sets the relationship between
the level of the dry signal and the level of the
effect in this block.
OutLev – Output Level
Range: -100 to 0 dB
This parameter sets the overall output level for
this effect Block.
REVERB