Ironwood Electronics SS-BGA User Manual User Manual
Page 11
SSI.doc, Rev. A, IP
Rev. B/C/D, RP
Rev. E, VP
10
Tel: (800) 404-0204 • (952) 229-8200
Fax: (952) 229-8201
11351 Rupp Dr. Suite 400, Burnsville, MN 55337
www.ironwoodelectronics.com
• Heavy cleaning should be avoided if possible and if needed should only be performed once in the
lifetime of the test probes. Heavy cleaning can be done by using the same tools and methods as
with light cleaning with the exception of a soft brass brush being used with a very small amount of
alcohol. Remember that an excess of alcohol and heavy brushing can lead to damage as well as
unfavorable test results.
Heat Sink Specifications
For high power dissipation, a specific heat sink lid can be designed using QFIN software. Please call
Ironwood Tech Support @1-800-404-0204.