Ironwood Electronics SS-BGA User Manual - Manual (Page 7)

SSI.doc, Rev. A, IP
Rev. B/C/D, RP
Rev. E, VP
6
Tel: (800) 404-0204 • (952) 229-8200
Fax: (952) 229-8201
11351 Rupp Dr. Suite 400, Burnsville, MN 55337
www.ironwoodelectronics.com
IC Insertion/extraction
A vacuum pen is recommended for insertion/extraction of ICs. Figure 6 shows a typical vacuum pen. TL-
vacuumpen-01 can be purchased separately. Hand insertion of ICs and extraction using a small tweezers is
also acceptable.
127.00mm
[5.000"]
12.70mm [0.500"]
Figure 6: Vacuum Pen with
Attachments