SOLO 433 Hochdruckspritze - Manual (Page 36)

Operating and maintenance instructions
ENGLISH 18
13.6 Scheduled maintenance
The following information is based on standard operating conditions.
For special conditions, such as prolonged daily use, the recommended
maintenance intervals should be reduced accordingly.
Implement all maintenance jobs regularly. If required, authorise a specialist
service centre to maintain the machine for you. The owner of the machine is
responsible for:
x Any damage caused by a lack of maintenance, incorrect or late
maintenance and repairs
x Consequential losses - including corrosion - from incorrect storage
after the first 5 hours daily wee
kl
y
after every 50
hours
after every 10
0 hours
as re
qui
red
before sp
ra
y
sea
so
n
Clean X
Air filter
Replace X
Check electrode gap and replace spark
plug if required X X
Spark plug
Replace X X
All accessible screws
(except for adjusting screws)
Retighten
X
X
X
Operating controls
(Stop-button, throttle lever,
operating handle, pressure
regulator) Check function
X
Exhaust
Visual check X
Spray output volume and
distribution Check X
Liquid tank
Empty and clean X
Liquid tank inlet filter
Clean X X
Spray nozzle
Clean X X
Liquid or fuel leaks
Check X
Visual check X
Test run with water X
Complete machine
Clean X X
Furthermore, as part of the annual service at an authorised dealer, request the following services:
x Complete check of the entire machine
x Professional cleaning of the engine (fuel tank, cylinder head fins, …)
x Check and, if necessary, replace wearing parts, particularly the annual fuel filter change
x Optimum setting of the carburettor