Net Optics 10_100 to Triple-speed Port Aggregator - Manual (Page 7)

10/100 to Triple-speed Port Aggregator
3
Key Features
Passive, Secure Technology
• Supports full-duplex monitoring with a single NIC, increasing monitoring
efficiency
• Regeneration Tap technology enables two devices to simultaneously
monitor all aggregated traffic – using only one NIC per device
• Provides 10/100/1000 Monitor ports to support higher speed monitoring
tools
• 10/100 Network ports automatically determine speed of attached link and
operate accordingly
• 10/100/1000 Monitor ports operate in auto-negotiation mode and advertise
all available speeds
• One gigabyte of total memory prevents data loss during excessive traffic
loads
• Provides complete full-duplex visibility at 10 or 100 Mbps without data
stream interference or introducing a point of failure
• Unique Zero Delay technology ensures that every packet goes through
without delay, even if power is lost to the Tap
• Compatible with Mid-Span Power over Ethernet (PoE) applications
• Passes all traffic (including errors) from all layers for comprehensive
troubleshooting
• No IP address is needed for the Tap or monitoring device, enhancing
monitoring security
• Redundant power ensures monitoring uptime
• Fully RoHS compliant
Ease of Use
• Front-mounted connectors support easy installation and operation
• LED indicators show redundant power, speed, link, and activity status
• Monitoring and network cables included
• Optional 19-inch rack frames hold up to two Taps
• Compatible with all major manufacturers’ monitoring devices, including
protocol analyzers, probes, and intrusion detection/prevention systems
Support
• Net Optics offers technical throughout the lifetime of your purchase .
Our technical support team is available from 8 a.m. to 5 p.m. Pacific
Time, Monday through Friday at +1 (408) 737-7777 and via e-mail at
ts-support@netoptics .com . FAQs are also available on Net Optics website
at www .netoptics .com .