Net Optics 10_100 to Triple-speed Port Aggregator - Manual (Page 9)

10/100 to Triple-speed Port Aggregator
5
Product Diagrams
Figure 1: Front Panel
®
www.netoptics.com
1
2
Port Aggregator
1
Network Monitor
2 A B
10
100
1000
LINK
ACT
In-Line
Power LEDs Monitor Ports
1 & 2
Network Ports
A & B
LED Indicators
• 1 / 2: Main and Redundant Power . If the Tap is deployed with both power
supplies, both LEDs will illuminate when the Tap is plugged in . If an LED
is off, this indicates that the corresponding power supply is not functioning .
• Link Speed Indicator: Located in the upper left corner of each RJ45 con-
nector . It illuminates solid amber for a 10Mbps link, yellow for a 100Mbps
link, and green for a 1000Mbps link .
• Link/Activity Indicator: Located in the upper right corner of each RJ45
connector . If a good link is established, the LED illuminates a steady green .
If there is current activity on this link, the LED flashes.