Asus PIKE 1078 - Manual (Page 44)

2-30 Chapter 2: RAID configuration
9. Click Accept to accept the changes to the virtual disk definition, or click Back
to return to the previous settings.
10. Click Next when you are finished
defining virtual disks.
The configuration preview screen
appears, as shown in the right
figure.
11. Check the information in the
configuration preview.
12. If the virtual disk configuration is
acceptable, click Accept to save
the configuration. Otherwise, click
Cancel to end the operation and return to the WebBIOS main menu, or click
Back to return to the previous screens and change the configuration.
13. If you accept the configuration, click Yes at the prompt to save the
configuration.
The WebBIOS main menu appears.