Asus PIKE 1078 - Manual (Page 52)

2-38 Chapter 2: RAID configuration
The WebBIOS CU allows you to import the foreign configuration to the RAID
controller, or to clear the configuration so you can create a new configuration using
these physical disks.
If WebBIOS CU detects a foreign configuration, the screen appears, as shown in
the following figure.
The GUID (Global Unique Identifier) entries on the drop-down list are OEM names
and will vary from one installation to another.
Click ClearForeignCfg if you want to clear the configuration and reuse the
physical disks.
Click GUIDPreview if you want to preview the foreign configuration. The screen,
as shown in the following figure, appears.
The right panel shows the virtual disk properties of the foreign configuration. In this
example, there is a RAID 1 virtual disk with 1,000 Mbytes. The left panel shows the
physical disks that comprise the foreign configuration.
Click Import to import this foreign configuration and use it on this controller.
Click Cancel to clear the configuration and reuse the physical disks for another
virtual disk.