Asus PIKE 1078 - Manual (Page 9)

ASUS PIKE 1078 1-3
1.3 Card layout
The images below show the major components of the RAID card.
1.4 System requirements
Before you install the PIKE 1078 SAS RAID card, check if the system meets the
following requirements:
•
Workstation or server motherboard with a PIKE RAID card slot
• SAS or SATA hard disk drives
• Supporting operating system:
Windows
® and Linux operating systems (refer to website for details)
• Other requirement:
- Appropriate thermal solution
- Certified power supply module
1. ASUS PIKE interface-1: PCI-E x8
2. ASUS PIKE interface-2: 8-port SAS signal with SGPIO interface*
3. SAS RAID card status LED (lights up and blinks to indicate that the card is
working normally)
* The SGPIO interface is used for visibility into drive activity, failure and rebuild
status, so that users could build high-performatnce and reliable storage
systems. Refer to the motherboard manual for detailed information about
using the SGPIO connectors on the motherboard.
1
3
1 2 2
1
3
1 2 2
(Outer heatsink removed, for 1U server)