Asus ESC500 G3 - Manual (Page 135)

4-57 ASUS ESC500 G3
4. Select Yes and press <Enter>. When BIOS update is done, press <ESC> to exit BIOS
Updater. Restart your computer.
DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
• For BIOS Updater version 1.3 or later, the utility automatically exits to the DOS prompt
after updating BIOS.
• Ensure to load the BIOS default settings to ensure system compatibility and stability.
Select the Load Optimized Defaults item under the Exit BIOS menu. See section
4.10 Exit Menu for details.
• Ensure to connect all SATA hard disk drives after updating the BIOS file if you have
disconnected them.