Asus ESC500 G3 - Manual (Page 32)

Chapter 2: Hardware setup 2-12
2.4.3 Installing a DIMM
A DIMM is keyed with a notch so that it fits in only one direction. DO NOT force
a DIMM into a socket in the wrong direction to avoid damaging the DIMM.
• Unplug the power supply before adding or removing DIMMs or other
system components. Failure to do so may cause severe damage to both
the motherboard and the components.
• Always insert the DIMM into the socket vertically to prevent DIMM notch
damage.
1
2
3
2.4.4. To remove a DIMM
B
A