Asus ESC500 G3 - Manual (Page 35)

2-15 ASUS ESC500 G3
7. Swing the HDD cage inwards back
to its original position.
8. Push in the bay locks to secure the
hard disk drive in place.
9. Connect a 7-pin SATA cable (from
the motherboard SATA port) and a
15-pin power plug (from the power
supply unit) to the rear connectors
of the hard disk drive.
Use either the 15-pin SATA power connector or the legacy 4-pin power
connector. Do not use both types of power connectors to prevent damage to
components.