Asus ESC500 G3 - Manual (Page 69)

3-21 ASUS ESC500 G3
Code table for G.P. Diagnosis card
15, 19 Initiate chip AC OS in PIC mode
E0 Check and wake up system AA OS in APIC mode
2B-2F Prepare system for memory
detection and sizing
A0 Leave BIOS and pass control
to OS
32 Early CPU initiation 01 S1
34 Wake up AP 03 S3
98 Detect PS2 mouse/keyboard 04 S4
97 Initiate VGA BIOS 05 S5
9A-9D USB initiation 10 Resume from S1
A2 Detect SATA 30 Resume from S3
B2 Initiate option ROM 40 Resume from S4
1. Locate the TPM connector (20-1 pin TPM) on the motherboard.
Ensure to turn off the power supply unit before installing the diagnosis card to avoid
electrical shock hazard.
Installing G.P. Diagnosis card
2. With the LEDs of the diagnosis card
facing to the PCIe slots, align the card
connector with the TPM connector and
press firmly until the card sits on the
connector completely.