Asus ESC500 G3 - Manual (Page 48)

Chapter 2: Hardware setup 2-28
1
2
3
4
5
6
7
8
2.9 Connecting cables
The ESC500 G3 chassis includes the power and signal cables that you need to
connect to the motherboard, storage drives, and other devices that you intend to
install.
• The bundled system cables are connected before shipping. You do not
need to disconnect these cables unless you will remove pre-installed
components to install additional devices.
• Refer to Chapter 3 for detailed information on the connectors.
Standard cables connected to the motherboard
1. 24-pin EATX power plug
2. 8-pin EATX 12V power plug
3. Front panel USB 2.0 cable
4. Front panel audio module cable
5. System fan cable
6. CPU fan cable
7. System panel cable
8. Front panel USB 3.0 cable