Nameplate information – Xylem AquaBoost CS and VS Pumping Packages User Manual
Page 14
AquaBoost VS duplex
2
3
5
6
7
7
4
1
8
9
RS000007
This variable-speed duplex configuration uses the Aquavar CPC controller (for 3–phase
power supply: 1.5 to 5 hp range).
1.
Pump: NPE with TEFC motor
2.
Safety switch single-point power panel
3.
Aquavar CPC controller
4.
Temperature relief valve
5.
Discharge header: copper L-type
6.
Suction header: copper L-type
7.
Pressure transducer assembly
8.
To controller
9.
To drain
Nameplate information
Nameplate
Every pump station has a nameplate that provides information about the pump station.
The pump station nameplate is located on the outside of the control enclosure door.
When ordering spare parts, please be prepared to identify the nameplate information
when contacting the factory.
• Model
• Size
• Serial number
• Item numbers of the required parts
Model number
Serial number
Voltage
Phase
Hz
SCCR
FLA
Max. HP
RS000033
Nameplate field
Explanation
Model number
The model number of the pump station
Serial number
The serial number of the pump station
Voltage
Input voltage required for the pump station
Phase
Single-phase or 3–phase
Hz
Frequency
Product Description
12
AquaBoost CS and VS Pumping Packages Installation, Operation, and Maintenance Manual