Xylem AquaBoost CS and VS Pumping Packages - Manual (Page 18)

5. Discharge gauge
6. Optional pressure reducing valve
7. Vibration eliminator
8. 1/4 in. inlet tap on the check valve for low-suction pressure switch
9. City supply
10. To system
_ _ _ _ Dashed lines indicate field installation.
AquaBoost CS duplex
1
2
3
4
5
6 7
8
9
10
RS000010
Typical field piping arrangement for the AquaBoost Constant Speed duplex pumping
package.
1. 1/4 in. tap on the suction manifold for low-suction pressure switch
2. Optional tank
3. Discharge gauge
4. Optional pressure reducing valve
5. Vibration eliminator
6. Anchor the pipe securely if vibration eliminators are used.
7. If a bypass line is installed, then this valve must be kept closed during normal operation. Do not install a
check valve.
8. Suction gauge, recommended
9. City supply
10. To system
_ _ _ _ Dashed lines indicate field installation.
Installation
16 AquaBoost CS and VS Pumping Packages Installation, Operation, and Maintenance Manual