Xylem HVS 1.1 - 3.4 - Manual (Page 12)

12
Variant for HVS 1.15/HVS 1.2/HVS 3.2/HVS 3.3/HVS 3.4:
Screws with
Gasket
Thermistor
Connection
Motor conduit box
4 mounting
clamps
4 screws
M5x50
CAUTION!
Don’t forget the gaskets
for the 3 screws.
Ensure that there is no
water on the unit before you
open the cover.
CAUTION!
If you use a motor with plastic fan cover, you have to
use a mounting ring.
Mounting ring
Centre bit
Mounting:
Remove the 3 screws holding the HVS
cover.
Place the centre bit in the HVS fan cover.
Place the HVS fan cover on the motor.
Hang the 4 clamps by the motor fan
cover and fix them with the 4 screws.
Mount the cover with the 3 screws.