Xylem HVS 1.1 - 3.4 - Manual (Page 24)

24
7 Settings at the Submenu-Parameter
IMPORTANT!
Before entering the secondary menu these instructions must be read
carefully to prevent incorrect settings which will cause malfunction.
Parameter settings on the end of the manual with the number of the side and place for the
changing Parameters.
7.1 Auto start
Auto Start
Enabled
You can select between Ð Disabled and Ï Enabled
Autostart Enabled means that the pump starts again automatically after an interruption of
the power supply (power failure).
If Autostart Disabled is set, the pump has to be restarted manually after a power failure,
by pressing Ð and П.