YSI 3200 - Manual (Page 12)

Getting Started Section 2
Units
0.0000
uS
K=1.000
25.0°C
11:33
AM
-10.00°
C
1.91%/°C
T CELL
CELL SETUP DIAG RANGE
OPERATION
Soft key
functions
It is important to remember that the cell constant is NOT used when displaying conductance. To
change the measurement units, see 3.5 Display Configuration, Measurement Units.
The bottom row of the display shows the soft key menu.
2. Set the Date and Time
Press the [SETUP] soft key to enter the Setup menu.
0.0000
uS/cm
K=1.000
25.0°C
11:33
AM
-10.00°
C
1.91%/°C
T CELL
DISPLAY TIME/DATE SYSTEM RANGE
SETUP
Then, press the [TIME/DATE] soft key to enter the Time/Date menu. The following screen will
be displayed.
TIME/DATE
[ 8:34:04] AM
[ 2/15/1997]
[AM/PM] time format
[MM/DD/YY] date format
UP DOWN DIGIT NEXT
The cursor (underline) starts at the first digit of the time field. Use the [UP] or [DOWN] soft key
to change the underlined digit. When you have the correct digit displayed, press the [DIGIT] soft
key to move the cursor to the next digit, then use the [UP] or [DOWN] soft key to change that
digit. After you have entered the correct time, press the [NEXT] soft key to move the cursor to
the date field, then enter the correct date using the [UP], [DOWN] and [DIGIT] soft keys.
After you have entered the correct date and time, press the [MODE] key two times to save and
exit to the Setup menu.
YSI Incorporated Model 3200 8