YSI 3200 - Manual (Page 32)

Data Storage and Retrieval Section 4
If you wish to store a record at a location other than the current one, use the [UP], [DOWN] and
[DIGIT] soft keys to select the memory location desired.
If the current record location contains data, you will see the following display to warn you that
the current memory location contains data.
3.152
uS/cm
11:33
AM
24.38°
C
UP DOWN DIGIT STORE
STORE
Record #
[01]
FULL
Record number
WARNING
If the current memory location already contains data and you press [STORE], the current readings
will be stored and the previous readings will be erased.
NOTE: There is NO way to restore previous data once it has been erased.
When you have finished storing records, press [MODE] two times to return to Operation mode.
4.2 REVIEW
From the Data menu, press the [REVIEW] soft key to enter Review mode and display the
following menu.
2/19/97 8:45
AM
REVIEW
13.15 uS/cm 24.38°
C
record #
[ 0]
69.70
Kohm-cm
0.4
ppt
FULL
K=1.090
1.91%/°C
RECALL SEND ALL CLEAR CLR ALL
Review is used to recall stored readings (records), send stored readings via the RS232 serial port
or delete stored readings.
YSI Incorporated Model 3200 28