YSI 5000 - Manual (Page 33)

30
Delete All
To delete ALL stored data, press the [DEL. ALL] soft-key to display the following:
98.0 % 8.15 mg/L
Delete All
0.0
ppt
740
mmHg
24.38°C 11:33 AM 02/06
Press ENTER to DELETE ALL
RECALL SEND ALL CLEAR DEL. ALL
Press [ENTER] to confirm your decision and delete ALL stored data. Press [MODE], instead of
[ENTER], if you wish to abort.
NOTE: There is NO way to restore data once it has been deleted.
Press [MODE] to return to Main mode.
Send
While in the Main menu, the [SEND] soft-key is used to send the current live display readings to
a computer or serial printer via the RS232 port. This is an alternative to storing results, recalling
them, and then printing them.
8.15
*
mg
/L
24.38°C 11:33 AM
STORE REVIEW SEND CALIBRATE
Each time you press the [SEND] soft-key, on the model 5100, the current display values are sent,
along with the salinity setting, date and barometric pressure reading. The model 5000 prints the
same information, however, the barometric pressure is the current setting and not a reading. The
output format can be changed under 5.2 Report Setup. The following are examples of the send
format:
Space Delimited Format
mg/L % C ppt mmHg TIME DATE
8.69 98.5 21.5 0.0 797 10:17:30 02/06/96
Record: 01
Record Full
Main
Record number