YSI 6500 Environmental Process Monitor - Manual (Page 14)

Installation Section 2
Figure 6 Attaching the Mounting Brackets
The following steps should be followed when
wall mounting the 6500 Monitor.
1.
Loosely fasten the mounting brackets
(included) to the back of the 6500
Monitor with the mounting screws
provided as shown in Figure 6.
2.
Tighten the screws, securing the
brackets to the Monitor.
3.
Loosely fasten the 6500 Monitor to
the mounting surface with the
mounting screws provided as shown
in Figure 7.
4.
Tighten the screws, securing the Monitor to the surface.
Figure 7 Securing the screws to the mounting surface
Wall Mount
2.5 WIRING INSTRUCTIONS
YSI Incorporated 6500 Environmental Process Monitor 10