YSI 6500 Environmental Process Monitor - Manual (Page 32)

System Setup Section 3
If you are using more than one sonde with your 6500 Monitor, you can choose how many sondes
you would like to view on the 6500 Monitor screen simultaneously by selecting the Multi-sonde
option as shown below.
Once selected, two additional options appear as shown.
You will now want to select the number of lines (displayed parameters) which will be shown
simultaneously on the 6500 Monitor during the run mode. Highlight Lines per Sonde and press
Enter. This selection is identical to that described above for use of the 6500 with a single sonde.
The chosen number of Lines per Sonde will be applied to the output of all of the displayed
sondes.
Highlight the desired setting, press Enter to select it, and then press Esc to return to the Display
menu.
Next, you will want to select the number of sondes per screen you wish to view. Highlight
Sondes per screen and press Enter.
If you have more than one sonde connected, you can choose to view 1,2, or 4 sondes per screen.
Highlight the desired setting and press Enter to select it. If you choose “1 sonde/screen”, you can
still view the data by scrolling right and left to view the other sondes connected. If you have
three sondes connected, you can choose “4 sondes/screen” to view all of the sondes on the screen.
One section will appear blank.
After your have configured your display as desired, press Esc to return to the Main menu.
YSI Incorporated 6500 Environmental Process Monitor 28