6 setting of current outputs, Setting of current outputs -29, And section 4.6) – YSI IQ S ENSOR N ET DIQ/S 182 XT User Manual
Page 201: See section 4.6 )
MIQ/CR3; DIQ/CR3
Settings
4 - 29
ba76032e01
01/2012
4.6
Setting of current outputs
The following steps describe operation with the 2020 XT system. With
the System 182 XT, the outputs of the DIQ/CR3 can be found directly
under the Settings menu (see system operating manual of the DIQ/
S 182 XT).
Fig. 4-17 150 - Settings of outputs and links
1
Call up the measured value display with
m
.
2
Open the Settings menu with
s
.
3
Highlight the Settings of outputs and links menu item with
d
and confirm with
g
. The Settings of outputs and links display
appears.
4
Highlight the Feature column with
d
and confirm with
g
.
5
Highlight a line for a current output (Cx) in the Feature column
with
d
and confirm with
g
.
The Settings of outputs and links display opens.
6
Highlight the Current output menu item with
d
and confirm
with
g
.
7
Select a function with
d
and confirm with
g
.