Mounting the universal transmitter in the panel – YSI IQ S ENSOR N ET DIQ/S 182 XT User Manual
Page 44
Advertising
Installation
System 182
3 - 24
ba76022e01
12/2011
Mounting the Universal
Transmitter in the panel
Fig. 3-20 Mounting the Universal Transmitter in the panel
1
Insert the Universal Transmitter in the panel aperture from the
front.
2
Slightly unscrew the screws (pos. 2 and 3) of the two angle
brackets (pos. 1 in Fig. 3-20), but do not remove them.
3
Push in the two angle brackets - as shown in Fig. 3-20 - into
the lateral guides of the Universal Transmitter up to the stop.
4
Tighten the screws (pos. 2).
5
Screw in the screws (pos. 3) until the screws rest snugly
against the panel.
1
2
3
3
2
For stack m
oun
ting rem
ove la
bel
and in
stall con
tact ca
rrie
r
Advertising