YSI IQ S ENSOR N ET DIQ/S 182 XT User Manual
Page 35
Advertising
System 182
Installation
3 - 15
ba76022e01
12/2011
Fig. 3-13 SENSORNET connection
Note
The complete assignment of the terminal strip is shown in section 3.12.
6
Connect the cable ends to the terminal strip. At the same time,
look out for the designations of the terminals (red / shield /
green).
7
Tighten the coupling ring (pos. 3 in Fig. 3-12).
8
Close the enclosure.
SNCIQ(/UG)
or SACIQ
red
green
X3
X2
X1
SENSORNET 1
RED
SHIELD
GREEN
Terminal
designation:
Filler stranded wire (SNCIQ...)
or black (SACIQ)
Advertising