YSI IQ S ENSOR N ET DIQ/S 182 XT - Manual (Page 48)

Installation System 182
3 - 28 ba76022e01 12/2011
3.7 Electrical connections: General instructions
Cable glands All electric cables are fed from below via prepared openings in the
enclosure of the DIQ/S 182 and the MIQ modules. Cable glands with
different clamping ranges are included with the IQ S
ENSOR N ET to
provide sealing between the cable and enclosure as well as for strain
relief. Select the matching cable gland for the respective cable
diameter:
 Small, clamping range 4.5 to 10 mm. This cable gland is suitable for
all IQ S ENSOR N ET cables (including earth cable after stripping the
outer insulation, see section 3.4.4) and IQ S ENSOR N ET sensor
connection cable.
 Large, clamping range 7 to 13 mm. This cable gland is required for
cable sheaths with an outside diameter of more than 10 mm and is
screwed into the enclosure via an extension piece.
Note
If necessary, you can order other sizes of cable gland (see
chapter 11 A
CCESSORIES AND OPTIONS ).
sealing ring 20 x 15 x 1 mm
cable gland M16
blind plug
sealing ring 20 x 15 x 1 mm
extension piece M16/M20
sealing ring 24 x 19 x 2 mm
cable gland M20