7 sensor-controlled cleaning, Sensor-controlled cleaning -20, Section 6.4.7 – YSI DIQ/S 182-MOD System 182 User Manual
Page 106
Advertising
Relay outputs
System 182
6 - 20
ba76025e01
02/2012
6.4.7
Sensor-controlled cleaning
With the Sensor controlled function, the relay is controlled by a linked
sensor.
Requirement
Sensor that transmits signals to trigger a cleaning cycle, e.g. UV/VIS
sensor
Settings
Note
Settings of the cleaning process can be done in the SETTINGS menu
of the respective sensor.
Setting
Selection/Values
Explanation
Pulse length
Automatic
The duration of the air
cleaning process is
programmed in the
sensor.
The relay automati-
cally takes over the
cleaning duration
from the sensor.
0,5 s
1 s
2 s
3 s
The relay finishes the
cleaning after the
selected interval.
Advertising