Section 3.5.2) – YSI DIQ/S 182-MOD System 182 User Manual
Page 33
Advertising
System 182
Installation
3 - 19
ba76025e01
02/2012
3.5.2
Mounting on a mounting stand with the SSH/IQ sun shield
Materials required
SSH/IQ sun shield (see chapter 12 A
Tools
4 mm set screw wrench
Phillips screwdriver.
Mounting the sun shield
on a mounting stand
Fig. 3-15 Mounting the SSH/IQ sun shield on a mounting stand
1
Screw the sun shield (pos. 1 in Fig. 3-15) with the four
hexsocket head screws (pos. 2), the washers (pos. 3) and the
clamps (pos. 4) at the required height on the mounting stand
from the back.
2
3
4
1
Advertising