YSI DIQ/S 182-MOD System 182 - Manual (Page 29)

System 182 Installation
3 - 15 ba76025e01 02/2012
Fig. 3-13 Example: SENSORNET connection
Note
The complete assignment of the terminal strip is shown in section 3.12.
6 Connect the cable ends to the terminal strip. At the same time,
look out for the designations of the terminals (red / shield /
green).
7 Tighten the coupling ring (pos. 3 in Fig. 3-12).
8 Close the enclosure.
SNCIQ(/UG)
or SACIQ
red green
X3 X2 X1
SENSORNET 1
RED SHIELD GREEN
Terminal
designation:
Filler stranded wire (SNCIQ...)
or black (SACIQ)