YSI DIQ/S 182-MOD System 182 User Manual
Page 24
Advertising
Installation
System 182
3 - 10
ba76025e01
02/2012
Note
Only use the plastic tapping screws supplied for attaching the contact
base. They ensure the correct fit.
Premounting the ISO
blind nuts
Fig. 3-8
Premounting the ISO blind nuts (variant 2)
5
Attach the contact base (pos. 6 in Fig. 3-7) on the Universal
Transmitter with the two plastic tapping screws (pos. 7).
6
Insert the cheese-head screws (pos. 8 in Fig. 3-8) with the
plastic washers in the drilled mounting holes in the module lid
and loosely screw in the ISO blind nuts (pos. 9).
8
9
MIQ module
Advertising